A. Abedc, Kadhemm.
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
Abd, Osama Ibrahim
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Abdul-Latiff, Nawal Ezzat
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Abdulridha, Hind H.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
Abed, Kadhum Ahmed
Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]
Ahmadb, Sara Mohamad
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Ahmed, Hamdi E.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
Ahmed, M. A.
Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]
Alabdaly a, Ibrahim K.
Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]
Alamery, Mohammed Saeed
Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]
Alashaab, Ahmed Ali Najeeb
Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]
Al-duroobi, Ahmed A.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
Al-Hassania, Emad S.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Ali, Asaad K.
Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]
Al-Sabe’a, Balsam M.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Al-Sakini, Dr. Sahar R.
Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]
A.R Yass, Muhammad.
Effect of Paving Runway and Atmospheric Conditions on Airplane Takeoff Distance and Time [Volume 10, Issue 2, 2019, Page 382-392]
A. Yousif, Mustafa
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]
D
Dawood, Jamal J.
Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]
Dawood, Lamyaa Mohammed
Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]
Dawood, Lamyaa Mohammed
The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]
F
Fadhil, Obaid T.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
H
Haleel, Aseel J.
Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]
Hamah, Sheelan M.
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
Hasan, Hamad M.
Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]
Hussein, Nazhad Ahmad
Dynamic Response of a Cracked Composite Beam subjected to moving Load [Volume 10, Issue 2, 2019, Page 393-398]
Husseina, Nazhad Ahmad
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Hussenc, Areej H.
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
J
Jarallah, Dr. Husain Khalaf
Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]
K
Kassam, A. H.
Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]
Khalil, Wissam H.
Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]
Khudair, Anat Amer
The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]
Khudairb, Anat Amer
Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]
M
Maree, Iyd Eqqab
Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]
Mohammed, Dilshad A.
Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]
Mohammed, Emad A.
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
Mohammed, Qutaibah M.
Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]
M. Saod, Wahran
Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]
Mutlag, S. A.
Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]
Mutlag, Sattar A.
Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]
R
Rajab, Noor A.
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
S
Saber, Mr Hindren Ali
Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]
Sabr, Yousif Nassif
Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]
S.Ali, Yahya
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]
Salih, Wisam A.
Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]
S. Alwanb, B. Abbas
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
Shahada, A.
Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]
T
T. Nawar, Mohammed
Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]
W
Warsh, Waleed A.
Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]